HHO Gas Hydrogen 02
Mrxcell42 asked:
HHO Gas With Just 12 Volts 5 Amps Repapered capacitor with rainwater
Caffeinated Content – Members-Only Content for WordPress
November 1st, 2009 at 4:15 pm
Kansieo.com
but you will need to swap the + and — every few minute so it won’t oxide up so much
November 2nd, 2009 at 9:12 am
Caffeinated Content
The capacitor in this video was repapered and the electrolyte was removed.
It used to be a 10000mf at 25 volts with the new paper and the new electrolyte which is just water the mf are a lot less
November 5th, 2009 at 5:53 am
Kansieo.com
With a 2200uF capacitor you will need a big inductor and a low frequency Hz or lower to make it resonate
November 7th, 2009 at 4:52 pm
Caffeinated Content – Members-Only Content for WordPress
And not a pulse width modulation if you have a look at video HHO Gas Hydrogen 03 this is a home made capacitor
Not to tight I used a pen to roll it on
There are 2 layers of Cooking Aluminium foil 3 meters by 120mm and 2 layers of paper 3.1 meters by 180mm the gap size is about 0.1mm
With the pulse width modulation to get the best results you need the right inductor and capacitor to get resonate and resonant frequency as well
November 8th, 2009 at 2:22 pm
Caffeinated Content
Thank you for your Comments
All of the videos are done with Direct current DC off a power supply that operates from 0 to 30 volts and 0 to 20 amps
November 9th, 2009 at 12:32 am
Kansieo.com
i just tested my PWM with 400V 2200uF capacitor. sadly the production of hho did not changed. can you tell us what kind of capacitor you used?
November 10th, 2009 at 4:09 pm
Kansieo.com
Thank you for your Comments
To get the best result with the inductor and capacitor is to use a pulse width modulation controller i.e. this circuit operates by transferring energy back and forth between C and L. A circuit that does this is said to resonate, and the particular frequency at which this phenomenon occurs is known as the resonant frequency of the circuit. This resonant frequency is determined by the values of L and C
November 11th, 2009 at 5:15 pm
Caffeinated Content
i wonder what will happen if you use capacitor with inductor.
is it possible amperage can reduce by this way?
November 11th, 2009 at 8:08 pm
Caffeinated Content
Thank you for your Comments
Yes the water dose heat up but not as much as the plate system. this is just rainwater and nothing else added
November 12th, 2009 at 5:53 am
Create a video blog…instantly.
i knew it…the key is capacitor.
dose water heat up?
November 13th, 2009 at 1:42 pm
Website content
Fact: The water molecule has a positive end and a negative end. If placed in a magnetic field it will rotate itself accordingly. Pulse that magnetic field N S N S and it will spin. Spinning induces centrifugal force. The faster the frequency of the pulse the faster the spin. The faster the spin the stronger the centrifugal force. Spin it fast enough to overcome the molecular bonding and PRESTO! Separation. First grade Physics.
November 14th, 2009 at 2:36 pm
Create a video blog
Thank you for your Comments
I used Kitchen towel the real thin type that seem to work real well and Aluminium foil
The design is the same as any high capacitance capacitor
My design is the same but with rainwater and paper and Aluminium foil
There are 2 layers of foil 3 meters by 120mm and 2 layers of paper 3.1 meters by 180mm the gap size is about 0.1mm
November 16th, 2009 at 8:15 pm
Caffeinated Content
do you have more on the process? or direction to look for more information
November 16th, 2009 at 9:35 pm
Caffeinated Content
white with 2 sugers thanx.
November 17th, 2009 at 2:31 pm
Website content
give me a few days I make a new video and show how it’s done
November 20th, 2009 at 12:44 pm
Create a video blog
Tell us more
November 22nd, 2009 at 4:05 pm
Website content
HHO Gas With Just 12 Volts 5 Amps Repapered capacitor with rainwater